We buy all the products we test — no freebies from companies. If you purchase through our links, we may earn a commission, which helps support our testing.
We tested circular saws from Skil, Milwaukee, DeWalt, Makita, and more to find the best saw to meet your needs
Our 2023 class of 7 1/4" circular saws covers worm, hypoid, and direct drive device, battery-powered and plug-in, as well as rig- and left-side blade configurations.
We've tested the market's top battery-powered and plug-in circular saws, putting them through a grueling regiment of tasks that simulate prolonged use in the real world. Whether you need a lightweight saw for simple cuts here and there or you're a DIY enthusiast taking on a bathroom remodel, we have a saw that will meet your needs and budget. If you're interested in just cordless models, check out our cordless circular saw review, where we go much deeper on battery-powered models.
Our favorite circular saw and the one we think is right for most home users is the Skil 5280-01. It performed great all around, and the price is right. For professionals, though, we recommend the Skil SPT77WML-01. It earned the highest overall score, cutting through wood as well as metal, though it will cost you.
Editor's Note: We updated our circular saw review on December 3, 2024, to edit for clarity and provide more straightforward guidance on our top recommendations.
The Skil 5280-01 is a great all-around saw with a competitive price point. This relatively lightweight model (just 8.1 pounds) offers average plywood ripping capabilities and above-average crosscutting—the latter being a circular saw's primary function. The unit also manages crosscuts of dense wood quite well. Surprisingly, the Skil also does a decent job cutting metal pipes and sheets. The unit has common bevel settings marked with a stop at 45 degrees and a max setting of 52 degrees. Additionally, it has four notches for sighting cuts (two out on the leading edge and two within a sight box) for cuts of 0 and 45 degrees. When using these guides, the cutting accuracy is within a 32nd of an inch.
Our testers certainly like the performance and price, but the angle and depth settings left us with some gripes. First, the bevel adjustment uses a set screw instead of a lever, like the depth setting. The markings on the angle and depth are fairly well marked; however, the depth is located between the handle and blade, making it somewhat hard to see. Additionally, the markings are common wood dimensions as opposed to inches. Minor complaints aside, this saw ranked near the top of the class and came in well below average in price. All told, this is a fantastic saw. If you're a professional in search of a saw that cuts wood just as well as it cuts metal, be sure to check out the Skil SPT77WML-01. While it is more expensive, it's the machine to buy if this is your life's work.
The Skil 5280-01 perfectly balances price and performance, making it a great choice for the majority of consumers.
The Skil SPT77WML-01 is a professional-grade tool that is built to last a lifetime. This worm drive saw is a leader in the class at ripping dimensional lumber and crosscutting at the blade's full depth. Adjusting the angle and depth of the blade is easy, too. Both of these adjustments have black letters stamped into the steel, making them easy to see. Likewise, these adjustments are secured with a lever that makes them easy to operate. The blade bevel has a 45-degree stop to ensure the accuracy of that common cutting angle, while the sight lines are spot-on accurate at 0 and 45 degrees.
Undoubtedly, the Skil is a burly saw. However, its strengths might be overkill for many users. For instance, its power comes from its large motor, which makes it rather heavy (11.6 pounds). The saw also needs a power outlet, so it's less handy and will require an extension cord for many jobs. The DeWalt DWE575SB is another worthy option if you want something a little less pricey and a bit easier to use. That said, the Skil is worth its weight and cost if you want a saw for demanding cuts such as hardwood, sheet metal, and steel pipe.
If professional level performance is what you're after, the Skil SPT77WML-01 is the saw to have.
The Milwaukee M18 Fuel 2732-20 is a cordless saw designed for heavy use. In many of our tests, this saw ranked right up there with its corded counterparts. For instance, this saw cut through sheet metal and steel pipe with unexpected ease and agility. Full-depth crosscuts and rips were also well within the M18's capability. As far as ease of use is concerned, the lever-locked blade depth adjustment is easy to operate. Moreover, the saw weighs a manageable 8.9 pounds, and its adjustment markings are large and legible.
The M18 is an all-around solid saw that is convenient to operate. However, we encountered some design issues in the angle settings. For one, the bevel has no stops on common angles, such as 45 degrees. Also, the bevel adjustment is secured with a screw lock (instead of a lever) which can be a little harder to operate. Finally, this saw is one of the more expensive in the class. Yet, when we place these critiques in context, we find these issues to be minor compared to the saw's overall performance. All told, the M18 is a top-notch cordless circular saw. If a cordless saw isn't your top priority, the Skil 5280-01 proves to be a top contender at an affordable price.
The Milwaukee M18 blurs the lines between a battery-powered and plug-in saw.
Credit: Abriah Wofford
Compare Products
We made hundreds of cuts with these saws to find out which is the best overall, and the individual tasks each saw is best suited to tackle.
Credit: Abriah Wofford
How We Test Circular Saws
Since 2019, we have tested 20 different circular saws, both corded and cordless. Whether you plan to build your kid a treehouse or create the camper van of your dreams, you want to know that you're getting the right product for the job. We have created a test regime that simulates the toughest jobs a circular saw can tackle. We make multiple cuts and rips of dimensional lumber and cut sheet metal and steel pipes. Additionally, we go through every detail of the use of the saw, from the adjustment of the bevel and blade depth to the ease of swapping blades. We even measure the cutting guides' accuracy at various angles and assess the legibility of the markings in low light.
Our testing of circular saws is divided into three different metrics:
Wood Cuts (50% of overall score weighting)
Ease of Use (35% weighting)
Metal Cuts (15% weighting)
Why Trust GearLab
Senior Research Analyst Austin Palmer, review editor Matt Spencer, and author Nick Miley worked together to test, rate, and review circular saws. This trio has over two decades of combined experience testing products ranging from power tools to electronics such as electric mowers and electric scooters.
Nick brings writing and research techniques developed in university laboratories combing the literature, creating testing methodologies, analyzing data, and publishing academic articles. Austin has overseen thousands of product tests, including leaf blowers, drills, and pressure washers. Austin has a knack for honing in on the little details in a product's design that translates to appreciable performance outcomes. Lastly, Matt brings his attention to detail, a well-rounded knowledge of the technology sector, and a hunger to get his hands dirty testing products in the lab and out in the field.
We didn't just look as cutting performance but also ease of bevel and blade depth adjustments.
Part of the ease of use evaluation is blade removal. We liked products that have the tools needed for the task already built into the saw.
We took these saws to task on the most demanding mediums including galvanized steel pipe.
Analysis and Test Results
Our reviews focus on comparative analysis of products within a class. As such, we established three metrics that collectively cover all aspects of a circular saw. Continue reading for details of the tests comprising each metric.
We made a lot of saw dust in the production of this review so you can be sure that our advice is on point.
Credit: Abriah Wofford
What's the Best Value?
Our value assessment is not solely focused on cost but, rather, cost in relation to performance. When looked at through this lens, the Skil 5280-01 can't be beat. Indeed, it's a rare product that is both at the top of the class in performance and at the bottom of the class in price. That said, the professional-grade Skil SPT77WML-01 comes at a fair price considering its superior performance. The Skil is well worth the investment if you need a saw for regular, high-demand work.
Our standardized tests make it possible to directly compare 7 1/4" circular saws despite differences in power source and configuration.
Credit: Abriah Wofford
Wood Cuts
The primary function of a circular saw is cutting wood. As such, we focus most of our attention on how well these saws manage demanding wood cuts. Overall, the Skil SPT77WML-01, Makita Hypoid 5477NB, and Skil 5280-01 led the pack. While it is not surprising the two heavy-duty saws did exceedingly well in this assessment, what is amazing is how well the lightweight Skil 5280-01 did in comparison.
We cut through different thicknesses of lumber to test each saw's cutting abilities.
Credit: Abriah Wofford
Our first test appraises the saw's ripping capability. In this test, we use a framing blade to cut down the length of a 10-foot-long 2x12. We make the cut quickly, trying to push the saw to its limit. The Makita Hypoid 5477NB and Skil 5280-01 completed this task in a blistering 11 seconds. However, the Skil SPT77WML-01 and the Craftsman CMES500, two lightweight sidewinders, completed the same cut in 13 seconds.
While making rips with a circular saw is an important skill, more often than not, the saw will be used to make cross cuts. As such, we test the saws for this capacity by cutting across the grain of a 6x12-inch plank. Again, we use a framing blade and try to get the saw to cut as fast as possible. The Skil SPT77WML-01 and Skil 5280-01 came in first and second at 2.65 and 2.34 seconds, respectively. The Makita came in third at 2.71 seconds, grouping tightly with the Craftsman and DeWalt DWE54477NB.
Finally, we assess the saws for their ability to cut dense wood. This is the same test as the previous one, except here we use a finish blade. Interestingly, the Makita jumped ahead of the competition in this assessment, leaving the Skil SPT77WML-01 to trail behind by roughly half a second.
The DeWalt was good at wood cutting, but it wasn't as fast as our top saws.
Credit: Abriah Wofford
The Skil 5280-01 and DeWalt DWE54477NB were next up at 2.49 seconds and 2.71 seconds, respectively. All told, the leading saws cluster very close together in these tests, and you can't go wrong with either the Skil SPT77WML-01, Makita Hypoid 5477NB, or Skil 5280-01.
Ease of Use
A certain level of skill is required to effectively operate a power tool—particularly a circular saw. However, some saws are easier to run than others. Finding out which saws are the easiest to use is the goal of the ease of use evaluation. The DeWalt 20V MAX and DeWalt DWE575SB impressed us with their well-thought-out designs and, as such, are the standard by which all other models are compared. However, the Skil 5280-01 and Skil SPT77WML-01 are not too far behind.
We prefer models with a lever to set adjustments to the blade depth and angle simply because they require less grip strength and, as a result, are more easily secured. Both the DeWalt models have these features on the depth and angle settings. Additionally, both saws make it easy to see the markings on the adjustments. However, the DeWalt DWE575SB has two different bevel scales. One scale is stamped into the aluminum for fine measurements while the other is raised, marking common angles. The Skil SPT77WML-01 also makes it easy to read the markings on the bevel adjustment by stamping black numbers on a light silver background.
The lever action on the DeWalt makes it easy to set and secure the bevel.
Credit: Abriah Wofford
When it comes to adjusting the depth of the blade, the two DeWalt models and the Skil SPT77WML-01 are silky smooth, making it easy to slide between positions. The Skil 5280-01 posed little problems in adjustments, but it had some friction points along the travel, which docked it some points.
Lever-secured blade depth adjustments are easy on the hands while facilitating accurate cuts.
Credit: Abriah Wofford
Not all blade bevel settings are the same. Some have many markings for common cuts, like 22.5 and 45 degrees. Some have positive stops at these angles to ensure the precision of the cut. Moreover, some limit the max angle to 45 degrees, while others go as far as 57. Again, the DeWalt 20V MAX and DeWalt DWE575SB checked all the boxes with the widest range and positive stops at 22.5 and 45 degrees. The only other saw that came close to this standard is the Skil 5280-01. The Skil has markings at the common angles, maxes out at 52 degrees, and has a positive stop at 45 degrees if the set screw is adjusted right.
The DeWalt DWE575SB offers a wide range of cutting angles and positive stops at common cutting angles to guarantee accuracy.
Credit: Abriah Wofford
Most experienced carpenters will watch the blade when making a cut rather than using the sight line. However, there are situations where the sight line is needed. As such, we assess the visibility of the sight line as well as its accuracy. The Skil SPT77WML-01 impressed all with its redundant sightlines (on the baseplate's leading edge and inside the blade housing). The sightlines are clearly marked and are dead-on accurate. The Milwaukee M18 and the Skil 5280-01 are not far behind. The Skil 5280-01 has the same redundant sightline set as the other Skil SPT77WML-01 but is about 1/32 off, whereas the Milwaukee has sightlines for 0 and 45 degrees but is spot on with its cuts.
Finally, the weight of the saw contributes to the ease of use. While it is unfortunate that the most powerful saws will be the heaviest, some models do well to balance out these two aspects of saw design. At 8.1 pounds, the Skil 5280-01 is the best example of a powerful saw that is also relatively lightweight. That said, if you are interested in the lightest saw in the group, the Craftsman CMES500 holds that distinction. This saw weighs a mere 6.8 pounds.
Metal Cuts
Many readers may not know that a circular saw can manage metal cuts. However, when using a blade designed for the metal, they can be quite proficient at the task. We tested each saw in the review by cutting sheet metal and steel pipe. The Skil SPT77WML-01 moved through both mediums quickly and smoothly. However, the DeWalt DWE575SB wasn't too far behind.
For our sheet metal cutting test, we laid 16-gauge (~1/16") steel under a sheet of ¾" plywood and made a ¼" rip, timing how long it took to make the cut. The average for the class was 20.9 seconds. However, the Skil SPT77WML-01 completed this task in 16 seconds flat, Skil 5280-01 in 18.5 seconds, and DeWalt DWE575SB in 19 seconds. As a class, all the saws did quite well in this task and clustered closely around the average.
The pipe cutting exercise revealed slightly more variation amongst the saws than with cutting sheet metal. In this test, we again used the metal cutting blade on the saws and put them to work on a 2" diameter steel pipe. Again, the Skil SPT77WML-01 set the bar by passing through the pipe effortlessly in under 6 seconds. The DeWalt DWE575SB followed up in just under 7 seconds. Interestingly, the heavy-duty Makita Hypoid 5477NB lagged considerably behind the class in this exercise, requiring 10.7 seconds to complete the cut. Another outcome of note was the observed in the Craftsman. While this saw performed reasonably well, its all-plastic blade cover started to melt when exposed to the shower of sparks produced when making metal cuts.
The DeWalt DWE575SB working through a steel pipe. With the right blade, these saws are more than equipped to handle such tasks.
Credit: Abriah Wofford
How to Choose the Best Circular Saw
A circular saw is a staple in the toolbox for DIY workers and professionals alike, but finding the right one can be a challenge with the wide array of options on the market. To help narrow down your search, we outline some key buying considerations, including saw type, budget, and important features.
Corded or Cordless?
While we touch on this subject more in-depth in our full buying advice article, deciding between a cord or not is largely dependent on the type of work being done, along with user preference. A corded circular saw will provide ample power and extended run time needed to tackle more demanding tasks for those on job sites. Cordless options, on the other hand, offer lighter, easier use, and their portable application makes them an attractive option for folks needing tools where outlets are not available.
An important first consideration is whether a corded or cordless saw is right for you.
Credit: Abriah Wofford
What Makes a Durable Saw?
Finding a circular saw that can endure the daily abuse of a job site should be a high priority for those in professional settings. Characteristics such as reinforced steel and cast metal shoes with ridges can prevent damage from inevitable falls, while saws with magnesium housings help avoid motor damage. Typically, less expensive options will come with flat aluminum bases, which are more suitable for those using circular saws for occasional projects. Other features, such as work lights and rafter hooks, can be worth having if you're doing framing work where putting a saw down is necessary throughout the day.
Does Blade Side Matter?
The orientation of the blade on the left or right side of the motor will impact both the visibility and stability of your cuts. Blade left saws offer right-handed users a greater line of sight, while blade right saws improve stability since the majority of the shoe is placed over the material. This also applies to left-handed users, just in the opposite orientation. Deciding between the two is largely based on preference and feel, but it's also worth considering the safety of both styles. For right-handed operation, a blade right saw keeps the plane of the blade oriented outside of your body, which is important in case of kickbacks. Additionally, blade right saws dump sawdust away from your body. If you're new to the world of circular saws, we recommend starting with the standard blade right saw since it's generally safer and easier to get accustomed to when starting out.
Whether you choose a right or left-side blade, understanding the pros and cons of each will help you make an informed buying decision.
Credit: Abriah Wofford
What Features Should You Consider?
Finding a circular saw with the right features can make the difference between just an okay saw or your new favorite power tool. Folks with bevel cuts in mind will want to make sure their next saw comes equipped with positive bevel stops. Another feature that can improve safety is a blade break. Saws with blade breaks can avoid costly mistakes, whether they are a wood floor, a cord, or even a finger. Lastly, it's also worth considering saw options with spindle locks, which are especially useful for those interchanging blades regularly where time and workflow are paramount.
Once you've dialed in the specific needs of your next saw, finding the right features is the fun part.
Credit: Abriah Wofford
Conclusion
A circular saw is an essential tool in any craftsperson's kit. However, the market has a wide range of prices and performance characteristics. This review took plug-in and battery-powered saws and put them through identical tests, cutting wood and metal to see which performed the best and why. With the information gathered in this review, potential buyers can quickly and easily sort the saws to find the best match for their needs and budget. And for a comprehensive look at the best tools out there across all categories, check out our tool review.
